Nibe manual

Communications module SMS 40. District heating mod- ule FJVM 220. Serial number must always be given. Certification that the installation is carried out according to instructions in. In addition, fill in the page for the installation data in the User Manual.

Circulation pump setting.

Heating medium (page 16). If your system is affected by an operational disturbance you receive an alert via e- mail that allows you to react quickly. NIBE Uplink also gives you the opportunity to control comfort in your home no matter where you are.

Country specific information. Benchmark places responsibilities on both manufactur- ers and installers. The serial number can be found at the bottom right of the front cover and in the info menu (menu ). Oct tools are required for access.

Improper disposal of the product by the user in administrativepenaltiesinaccordancewithcurrentlegis- lation.

Inspection of the installation. Current regulations require the heating installation to be inspected before it is commissioned. The inspection must be carried out by a suitably qualified person. Feb Display with user instructions. In the event of a fault, the heat pump display shows what happened and the actions to be taken.

Read the Installer Manual. May Read the User Manual. Special care should be exercised during handling, install- ation, service, cleaning and scrapping to avoid damage to the refrigerant system, and thereby reduce the risk of leakage. The heat pump contains highly flammable refrigerant. Set the season: The NIBE can be run on three settings however to minimise your heating bill we suggest the following.

Select manual and adjust using the chart below. NB Deactivated = Crossed out. Listed below is some basic information on controlling your heat pump. Please read the user manual included in your tenant pack carefully to ensure you are familiar with the controls of the heat pump.

Jun placed near power cables. SMO can be connected with other products from. NIBE in several different ways, some of which are shown below (accessories may be required).

Nov farming and similar environments. Do not allow children to clean or main- tain the appliance unsupervised. It may not be translated without the approval of NIBE.

We reserve the right to make . Drawing out the cooling module. This is an original manual. To simplify transport and service, the heat pump can be separated by pulling the cooling module out from the cabinet. See the installer manual for more comprehensive instructions about the separation.

The system when well set up and operating in auto mode can be very energy efficient. For more information please refer to your boiler manual.